Michigan Administrative Code (Last Updated: November 16, 2016) |
Department LR. Licensing and Regulatory Affairs |
MIOSHA |
Chapter Part 26. Steel Erection |
Part 26. STEEL ERECTION |
Section 408.42655. Special training.
All data is extracted from pdf, click here to view the pdf.
-
(1) An employer shall ensure that each employee who performs multiple lift rigging has been provided training in both of the following areas:
(a) The nature of the hazards associated with multiple lifts.
(b) The proper procedures and equipment to perform multiple lifts required by R 408.42610.
(2) An employer shall ensure that each connector has been provided training in all of the following areas:
(a) The nature of the hazards associated with connecting.
(b) The establishment, access, proper connecting techniques, and work practices required by R 408.42629(1) and (2) and R 408.42646.
(c) Specific training on personnel hoisting as prescribed in Construction Safety Standard Part 28. "Personnel Hoisting in Steel Erection," as referenced in R 408.42602.
(3) Where CDZs are being used, an employer shall assure that each employee has been provided training in both of the following areas:
(a) The nature of the hazards associated with work within a controlled decking zone.
(b) The establishment, access, proper installation techniques, and work practices required by R 408.42620, R 408.42622, R 408.42640, and R 408.42648.
History: 2002 AACS; 2007 AACS; 2014 AACS.