Section 336.1902. Adoption of standards by reference.  


Latest version.

All data is extracted from pdf, click here to view the pdf.

  • Rule 902. (1) The following standards are adopted by reference in these rules. Copies are available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, Michigan 48909-7760, at a cost as of the time of adoption of these rules (AQD price). Copies may also be obtained from the Superintendent of Documents, U.S. Government Printing Office, 732 North Capitol Street, NW, Washington, DC 20401, or by accessing their online bookstore at http://bookstore.gpo.gov at a cost as of the time of adoption of these rules (GPO price). The standards can also be viewed and/or printed free of charge at http://ecfr.gpoaccess.gov.

    (a)   “National Primary and Secondary Ambient Air Quality Standards,” 40 C.F.R. Part 50 (2013), AQD price $61.00/$51.00 GPO price for Part 50 through Part 51.

    (b)   The following sections of “Requirements for Preparation, Adoption, and Submittal of Implementation Plans,” 40 C.F.R. Part 51 (2013), AQD price $61.00/$51.00 GPO price for Part 50 through Part 51:

    (i)   “Definitions,” 40 C.F.R. §51.100.

    (ii)   “Legally enforceable procedures,” 40 C.F.R. §51.160.

    (iii)   “Permit requirements,” 40 C.F.R. §51.165.

    (iv)   “Prevention of significant deterioration of air quality,” 40 C.F.R. §51.166.

    (v)   “Definitions,” 40 C.F.R. §51.301.

    (vi)   “Sources That Would Locate in a Designated Nonattainment Area,” Appendix S.

    (vii)   “Recommended Test Methods for State Implementation Plans,” Appendix M.

    (viii)   “Guideline on Air Quality Models,” Appendix W.

    (ix)   “Guidelines for BART Determinations under the Regional Haze Rule,” Appendix Y.

    (c)   “Prevention of Significant Deterioration of Air Quality,” 40 C.F.R. §52.21 (2013); AQD price $74.00/$64.00 GPO price for Part 52 (52.01 through 52.1018).

    (d)   “Quality Assurance Requirements for Prevention of Significant Deterioration Air Monitoring,” 40 C.F.R. §58, Appendix B (2013); AQD price $46.00/$36.00 GPO price for Part 53 through Part 59.

    (e)   “Standards of Performance for New Stationary Sources,” 40 C.F.R. Part 60, except 40 C.F.R. Part 60, Subpart AAA, “Standards of Performance for New Residential Wood Heaters” (2013); AQD price $74.00/$64.00 GPO price for Part 60 (60.1 to end).

    (f)   “Appendices,” 40 C.F.R. Part 60 (2013); AQD price $73.00/$63.00 GPO price for Part 60 Appendices.

    (g)  “National Emission Standards for Hazardous Air Pollutants,” 40 C.F.R. Part 61 (2013); AQD price $61.00/$51.00 GPO price for Part 61 through Part 62.

    (h)  “National Emission Standards for Hazardous Air Pollutants for Source Categories,” 40 C.F.R. Part 63, Subpart A to Z (2014); AQD price $74.00/$64.00 GPO price.

    (i)   “National Emission Standards for Hazardous Air Pollutants for Source Categories (Continued),” 40 C.F.R. Part 63, Subpart AA to DDD (2014); AQD price $63.00/$53.00 GPO price.

    (j)   “National Emission Standards for Hazardous Air Pollutants for Source Categories (Continued),” 40 C.F.R. Part 63, Subpart EEE to PPP (2014); AQD price $66.00/$56.00 GPO price.

    (k)   “National Emission Standards for Hazardous Air Pollutants for Source Categories (Continued),” 40 C.F.R. Part 63, Subpart QQQ to YYYY (2014); AQD price $47.00/$37.00 GPO price.

    (l)   “National Emission Standards for Hazardous Air Pollutants for Source Categories (Continued),” 40 C.F.R. Part 63, Subpart ZZZZ to MMMMM (2014); AQD price $50/$40 GPO price.

    (m)   “National Emission Standards for Hazardous Air Pollutants for Source Categories (Continued),” 40 C.F.R. Part 63, Subpart NNNNN to end (2014); AQD price $50.00/$40.00 GPO price.

    (n)     “Compliance  Assurance  Monitoring,”   40  C.F.R.  Part  64  (2013);  AQD  price

    $44.00/$34.00 GPO price for Part 64 through Part 71.

    (o)    The following sections of “State Operating Permit Programs,” Part 70 (2013); AQD price $44.00/$34.00 GPO price for Part 64 through Part 71:

    (i)   “Applicability,” 40 C.F.R. §70.3.

    (ii)   “Re-openings for cause by EPA,” 40 C.F.R. §70.7(g).

    (iii)     “Transmission of information to the Administrator,” 40 C.F.R. §70.8(a)(1) and

    (2).

    (iv)   “EPA objection,” 40 C.F.R. §70.8(c).

    (v)   “Public petitions to the Administrator,” 40 C.F.R. §70.8(d).

    (p)   “Permit Regulations,” 40 C.F.R. Part 72 (2013); AQD price $78.00/$68.00 GPO

    price for Part 72 through Part 80.

    (q)    “Sulfur Dioxide Opt-Ins,” 40 C.F.R. Part 74 (2013); AQD price $78.00/$68.00 GPO price for Part 72 through Part 80.

    (r)      “Continuous  Emission  Monitoring,”  40  C.F.R.  Part  75  (2013);  AQD  price

    $78.00/$68.00 GPO price for Part 72 through Part 80.

    (s)    “Acid Rain Nitrogen Oxides Emission Reduction Program,” 40 C.F.R. Part 76 (2013); AQD price $78.00/$68.00 GPO price for Part 72 through Part 80.

    (t)     “Federal NOx Budget Trading Program and CAIR NOx and SO2 Trading Programs,” 40 C.F.R. Part 97 (2013); AQD price $76.00/$66.00 GPO price for Part 96 through Part 99.

    (u)    “Global Warming Potentials,” 40 C.F.R. Part 98, Subpart A, Table A-1 (2013); AQD Price $76.00/$66.00 GPO price for Part 96 to Part 99.

    (v)    “Federal Power Act,” 16 U.S.C. §§796 (17)(C) and (18)(B) (2012); AQD Price

    $142.00/$132.00 GPO price for Section 344 through Section 856.

    (w)   “Solid Waste Disposal Act, Section 3005,” 42 U.S.C. §6925 (2012); AQD Price

    $68.50/$58.50 GPO price for Sections 6201 to end.

    (2)      The following United States Environmental Protection Agency (U.S. EPA) documents are adopted by reference in these rules. A copy is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, at a cost as of the time of adoption of these rules of $20.00 each. A copy may also be obtained from the U.S. Environmental Protection Agency, Office of the Science Advisor, 1200 Pennsylvania Avenue, NW, Washington, DC 20460 or on the U.S. EPA website, www.epa.gov, free of charge as of the time of adoption of these rules.

    (a)            “Advances in Inhalation Gas Dosimetry for Derivation of a Reference Concentration (RfC) and Use in Risk Assessment,” EPA/600/R-12/044, September 2012.

    (b)    “Guidelines for Carcinogen Risk Assessment, and Supplemental Guidance for Assessing Susceptibility from Early-Life Exposure to Carcinogens,” 2005.

    (c)      “Protocol for Determining the Daily Volatile Compound Emission Rate of Automobile and Light-duty Truck Topcoat Operations,” EPA-450/3-88-018, December 1988.

    (d)    “Benchmark Dose Technical Guidance,” EPA/100/R-12/001, June 2012.

    (e)      “Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products,” EPA-450/2-78-029, December 1978.

    (f)      “Alternative Control Techniques Document: NOx Emissions from Cement Manufacturing,” EPA-453/R-94-004, 1994.

    (g)   “Compilation of Air Pollution Emission Factors. Volume 1, Stationary Point and Air Sources,” EPA-450/AP-425-ED, January 1995.

    (3)     The following Federal Register documents are adopted by reference in these rules. A copy is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, at a cost as of the time of adoption of these rules of $10.00:

    (a)  U.S. EPA Emissions Trading Policy statement, 51 F.R. 43814, December 4, 1986.

    (b)  U.S. EPA Recommended Policy on Control of Volatile Organic Compounds, 42 FR 35314, July 8, 1977.

    (4)    The following standards are adopted by reference in these rules. Copies are available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, Michigan 48909-7760, at the cost as of the time of adoption of these rules (AQD price). Copies may also be obtained from ASTM International, P.O. Box C700, West Conshohocken, Pennsylvania 19428-2959 or on the ASTM website, www.astm.org, at a cost as of the time of adoption of these rules (ASTM price):

    (a)     Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure, ASTM method D86, 2012; AQD price $60.00/$50.00 ASTM price.

    (b)   Standard Test Method for Pour Point of Petroleum Products, ASTM D97, 2012; AQD price $52.00/$42.00 ASTM price.

    (c)    Standard Test Method for Vapor Pressure of Petroleum Products, ASTM D323, 2008; AQD price $52.00/$42.00 ASTM price.

    (d)       Standard   Specification    for    Fuel    Oils,    ASTM   D396,    2013;    AQD    price

    $52.00/$42.00 ASTM price.

    (e)   Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products, ASTM D402, 2008; AQD price $52.00/$42.00 ASTM price.

    (f)    Standard Specification for Aviation Gasolines, ASTM D910, 2013; AQD price

    $52.00/$42.00 ASTM price.

    (g)     Standard  Specification  for  Diesel  Fuel  Oils,  ASTM  D975,  2014;  AQD  price

    $70.00/$60.00 ASTM price.

    (h)    Standard Specification for Aviation Turbine Fuels, ASTM D1655, 2013; AQD price $58.00/$48.00 ASTM price.

    (i)   Standard Specification for Gas Turbine Fuel Oils, ASTM D2880, 2013; AQD price

    $49.00/$39.00 ASTM price.

    (j)    Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentration in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers, ASTM D6522, 2011; AQD price $52.00/$42.00 ASTM price.

    (k)   Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, ASTM D6751, 2012; AQD price $52.00/$42.00 ASTM price.

    (l)   Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources, ASTM D6784, 2008; AQD price $58.00/$48.00 ASTM price.

    (m)   ) Standard Guide for Packaging and Shipping Environmental Sample for Laboratory Analysis, ASTM D6911, 2010; AQD price $52.00/$42.00 ASTM price.

    (n)   Standard Test Method for Distillation of Emulsified Asphalt, ASTM D6997, 2012; AQD price $47.00/$37.00 ASTM price.

    (o)   Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20), ASTM D7467, 2013; AQD price $58.00/$48.00 ASTM price.

    (p)     Standard Practices for General Techniques of Infrared Quantitative Analysis, ASTM E168, 2006; AQD price $58.00/$48.00 ASTM price.

    (q)     Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis, ASTM E169, 2009; AQD price $58.00/$48.00 ASTM price.

    (r)    Standard Practice for Packed Column Gas Chromatography, ASTM E260, 2011; AQD price $58.00/$48.00 ASTM price.

    (5)    The following standards are adopted by reference in these rules. Copies are available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, Michigan 48909-7760, at the cost as of the time of adoption of these rules (AQD price). Copies may also be obtained from the American Association of State Highway and Transportation Officials, AASHTO Publication Order Department, P.O. Box 933538, Atlanta, Georgia, 31193-3538, at a cost as of the time of adoption of these rules (AASHTO price):

    (a)   Standard Method of Test for Testing Emulsified Asphalts, AASHTO T59, 2013; AQD price $86.00/$76.00 AASHTO price.

    (b)    Standard Method of Test for Cutback Asphalt Products, AASHTO T78, 2014; AQD price $70.00/$60.00 AASHTO price.

    (6)    “2014 TLVs and BEIs. Threshold Limit Values for Chemical Substances and Physical Agents, and Biological Exposure Indices,” is adopted by reference in these rules. A copy is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, at a cost as of the time of adoption of these rules of $69.95. A copy may also be obtained from the American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Cincinnati, Ohio 45240, or on the American Conference of Governmental Industrial website, www.acgih.org, at a cost as of the time of adoption of these rules of $49.95.

    (7)    “NIOSH Pocket Guide to Chemical Hazards,” 2010, is adopted by reference in these rules. A copy on CD-ROM is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, for $20.00 as of the time of adoption of these rules. A copy on CD-ROM may also be obtained from the Centers for Disease Control website, www.cdc.gov/niosh/npg/, for free as of the time of adoption of these rules.

    (8)   “American Petroleum Institute Manual of Petroleum Measurement Standards C19 S2,” is adopted by reference in these rules. A copy is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, at a cost as of the time of adoption of these rules of

    $139.00. A copy may also be obtained from American Petroleum Institute, Techstreet, 3916 Ranchero Drive, Ann Arbor, MI 48108-2775, or at the American Petroleum Institute website at http://www.techstreet.com/api/products/2409, at a cost as of the time of adoption of these rules of $129.00.

    (9)   “OTC Model Rule for Consumer Products,” 2009 is adopted by reference in these rules. A copy is available for inspection and purchase at the Air Quality Division, Department of Environmental Quality, 525 West Allegan Street, Lansing, MI 48909-7760, at a cost as of the time of adoption of these rules of $10.00. A copy may also be obtained from the Ozone Transport Commission website, www.otcair.org, for free as of the time of adoption of these rules.

History: 2008 AACS; 2013 AACS; 2015 AACS.