Section 408.12202. Adoption of standards by reference.

(1) The following standards are adopted by reference in these rules and are available from SAE World Headquarters, 400 Commonwealth Drive, Warrendale, Pennsylvania, 15096-001, USA, telephone number: 1-877.606.7323 or via the internet at website: www.sae.org; at a cost as of the time of adoption of these rules, as stated in this subrule.

(a)   Society of Automobile Engineers (SAE) standard SAE J4C “Motor Vehicle Seat Belt Assemblies,” 1965 edition. Cost $66.00.,

(b)   SAE J167A “Overhead Protection for Agricultural Tractors Standard.” Cost: $ 66.00.

(2)    The National Fire Protection Association (NFPA) standard, NFPA 505 “Type Designations, Areas of Use, Maintenance, and Operation of Powered Industrial Trucks,” 1975 edition, is adopted by reference in these rules and is available from NFPA, 1 Batterymarch Park, Quincy, Massachusetts, 02169-7471, USA, telephone number: 1-800- 334-3555 or via the internet at website: www.nfpa.org; at a cost as of the time of adoption of these rules of $27.00.

(3)   The following Federal Occupational Safety and Health Administration (OSHA) regulations are adopted by reference in these rules. Copies of these regulations are available from the United States Department of Labor, Occupational Safety and Health Administration, via the internet at website www.osha.gov, at no charge as of the time of adoption of these rules.

(a)    Occupational Safety and Health Standard for Agriculture: 1928.52 “Protective frames for wheel-type agricultural tractors -- test procedures and performance requirements.”

(b)   Occupational Safety and Health Standards for Agriculture: 1928.53 “Protective enclosures for wheel-type agricultural tractors -- test procedures and performance requirements.”

(c)       Safety and Health Regulations for Construction: 1926.1001 “Minimum performance criteria for rollover protective structures for designated scrapers, loaders, dozers, graders, and crawler tractors.”

(4)   The standards adopted in subrules (1), (2), and (3) of this rule are also available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Standards Section, 7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143.

(5)   Copies of the standards adopted in subrules (1), (2), and (3) of this rule may be obtained from the publisher or may also be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Standards Section, 7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and handling.

(6)   The following Michigan occupational safety and health standards are referenced in these rules. Up to 5 copies of these standards may be obtained at no charge from the Michigan Department of licensing and regulatory affairs, MIOSHA standards section, 7150 Harris Drive, P.O. Box 30643, Lansing, MI, 48909-8143 or via the internet at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, at the time of adoption of these rules, is 4 cents per page.

(a)    General Industry Safety Standard Part 33 “Personal Protective Equipment,” R 408.13301 to R 408.13398.

(b)   General Industry Safety Standard Part 37 “Accident Prevention Signs and Tags,” R 408.13701 to R 408.13736.

History: 2013 AACS.