Section 408.12409. Definitions; T, U.

(1) "Trip" or "tripping" means activation of the clutch to "run" the press.

(2)   "Turnover bar" means a bar used in die setting to manually  turn  the crankshaft of the press.

(3)   "Two-hand control device" means a 2-hand actuating device that further requires concurrent pressure from both  hands   of  the  operator during a substantial part of the die-closing portion of the stroke of   the press.

(4)   "Two-hand trip"  means  a   clutch  actuating   means  requiring   the concurrent use of both hands of the operator to trip the press.

(5)   "Unitized tooling" means a type of die in which the upper and lower members are incorporated into a self-contained unit so arranged as to hold the die members in alignment.

History: 1979 AC.