Michigan Administrative Code (Last Updated: November 16, 2016) |
Department LR. Licensing and Regulatory Affairs |
MIOSHA |
Chapter Part 24. Mechanical Power Presses |
Part 24. MECHANICAL POWER PRESSES GENERAL PROVISIONS |
Section 408.12413. Reports of injuries.
All data is extracted from pdf, click here to view the pdf.
-
An employer shall, within 30 days of the occurrence, report to the Director of the Bureau of Safety and Regulation of the Michigan Department of Labor, State Secondary Complex, 7150 Harris Drive, Box 30015, Lansing, Michigan 48909, all point of operation injuries or injuries within the confines of the die to operators or other employees.
All of the following information shall be included in the report:
(a) Employer's name, address, and location of the workplace (establishment).
(b) Employee's name, injury sustained, date of injury, and the task being performed (operation, setup, maintenance, or other).
(c) Type of clutch used on the press (full revolution, part revolution, or direct drive).
(d) Type of safeguard being used (2-hand control, 2-hand trip, pull-outs, sweeps, or other). If the safeguard is not described herein, give a complete description.
(e) Cause of the accident (repeat of press, safeguard failure, removing stuck part or scrap, no safeguard provided, no safeguard in use, or other).
(f) Type of feeding (manual with hands in dies or with hands out of dies, semiautomatic, automatic, or other).
(g) Means used to actuate press stroke (foot trip, foot control, hand trip, hand control, or other).
(h) Number of operators required for the operation and the number of operators provided with controls and safeguards.
History: 1979 AC; 1990 AACS.