Michigan Administrative Code (Last Updated: November 16, 2016) |
Department LR. Licensing and Regulatory Affairs |
MIOSHA |
Chapter Part 24. Mechanical Power Presses |
Part 24. MECHANICAL POWER PRESSES GENERAL PROVISIONS |
Section 408.12475. Tonnage, stroke, and weight requirements.
Latest version.
All data is extracted from pdf, click here to view the pdf.
-
Rule 2475. All dies shall be:
(a) Stamped with the tonnage and stroke requirements, or the requirements may be recorded if the records are readily available to the die setter.
(b) Stamped to indicate upper die weight when necessary for air counterbalance pressure adjustment.
(c) Stamped to indicate complete die weight when handling equipment may become overloaded.
History: 1979 AC.