Michigan Administrative Code (Last Updated: November 16, 2016) |
Department LR. Licensing and Regulatory Affairs |
MIOSHA |
Chapter Part 45. Die Casting |
Part 45. DIE CASTING |
Section 408.14523. Hydraulic and pneumatic systems.
All data is extracted from pdf, click here to view the pdf.
-
(1) Flexible and rigid hydraulic and pneumatic piping and its component parts shall have a designed safety factor of not less than 4 and shall be maintained to prevent leaks that constitute a hazard.
(2) A hydraulic pressure relief valve shall be provided on each separate system and set to open at a pressure of not more than 10% above the maximum operating pressure. The discharge of the valve shall not create a hazard for the employee. A die casting machine shall not be operated with the pressure relief valve removed.
(3) Fire resistant fluid shall be used in equipment where failure of a hydraulic system could cause ignition of the fluid by molten metal or flame.
(4) Hydraulic and pneumatic lines shall be protected from damage due to chafing or pinching.
History: 1979 AC.