Section 408.31061. Certificate.

Section 401.3 of the code is amended to read as follows:

401.3 Certificate. A permanent certificate shall be posted on or in the electrical distribution panel, and shall meet all of the following:

(a)      Be affixed or attached so it does not cover or obstruct the visibility of the circuit directory label, service disconnect label, or other required labels.

(b)      Be completed by the builder or registered design professional.

(c)       List the predominant R-values of insulation installed in or on ceiling/roof, walls, foundation (slab, basement wall, crawlspace wall and/or floor) and ducts outside conditioned spaces and U-factors for fenestration. If there is more than 1 value for each component, then the certificate shall list the value covering the largest area.

(d)        List the types and efficiencies of heating, cooling and service water heating equipment.

(e)        If a gas-fired unvented room heater, electric furnace, or baseboard electric heater is installed in the residence, then the certificate shall list "gas-fired unvented room heater," as appropriate. An efficiency shall not be listed for gas-fired unvented room heaters, electric furnaces, or electric baseboard heaters.

History: 1998-2000 AACS; 2008 AACS; 2010 AACS.