Section 408.44502. Adopted and referenced standards.

(1) The following federal occupational safety and health administration (OSHA) regulations are adopted by reference in these rules:

(a)    29 C.F.R. § 1926.500 “Scope, Application, and definitions applicable to this subpart,” effective July 10, 2014.

(b)   29 C.F.R. § 1926.501 “Duty to have fall protection,” effective January 26, 1995.

(c)   29 C.F.R. § 1926.502 “Fall protection systems criteria and practices,” effective January 26, 1995.

(d)  29 C.F.R. § 1926.503 “Training requirements,” effective January 26, 1995.

(2)   The standards adopted in subrule (1) of this rule are available from the United States Department of Labor, Occupational Safety and Health Administration website: www.osha.gov, at no charge as of the time of adoption of these rules.

(3)      The standards adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 7150 Harris Drive, Lansing, Michigan, 48909-8143.

(4)   The standards adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143, plus $20.00 for shipping and handling.

(5)   The following Michigan occupational safety and health (MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards may be obtained at no charge from the Michigan Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, as of the time of adoption of these rules, is 4 cents per page.

(a)          Construction Safety Standard  Part  10.   “Lifting  and  Digging   Equipment,” R 408.41001 to R 408.41099a.

(b)       Construction  Safety   Standard   Part    11.   “Fixed   and   Portable    Ladders,” R 408.41101 to R 408.41140.

(c)     Construction  Safety   Standard  Part  12.  “Scaffolds   and  Scaffold  Platforms,” R 408.41201 to R 408.41264.

(d)      Construction    Safety   Standard   Part   14.   “Tunnels,   Shafts,   Caissons,   and Cofferdams,” R 408.41401 to R 408.41483.

(e)    Construction Safety Standard Part 16. “Power Transmission and Distribution,” R 408.41601 to R 408.41658.

(f)     Construction  Safety   Standard  Part  21.   “Guarding  of  Walking  and  Working Areas,” R 408.42101 to R 408.42160.

(g)       Construction  Safety   Standard  Part  26.   “Steel  Erection,”  R 408.42601 to R 408.42656.

(h)   Construction Safety Standard Part 32. “Aerial Work Platforms,” R 408.43201 to R 408.43220.

History: 1996 AACS; 2015 AACS.