Michigan Administrative Code (Last Updated: November 16, 2016) |
Department LR. Licensing and Regulatory Affairs |
MIOSHA |
Chapter Part 24. Mechanical Power Presses |
Part 24. MECHANICAL POWER PRESSES GENERAL PROVISIONS |
Section 408.12429. Control reliability.
Latest version.
All data is extracted from pdf, click here to view the pdf.
-
Rule 2429. When required by R 408.12461 of this part, the control system shall be constructed so that a failure within the system does not prevent the normal stopping action from being applied to the press when required, but does prevent initiation of a successive stroke until the failure is corrected. The failure shall be detectable by a simple test, or indicated by the control system. This requirement does not apply to those elements of the control system which have no effect on the protection against point of operation injuries.
History: 1979 AC.